Tech Note 184 Detail

Hardware setup (Macintosh)

Affected Products:

CI-6765A Science Workshop 500

How do I setup my Science Workshop 500 interface?

PASCO Solution:
  1. With your computer turned off, locate the modem or printer port on the back of your computer.
  2. Connect either end of the modem/printer cable (included with the 500 interface) to the port on your computer. The cable is keyed so that you cannot plug it in incorrectly.
  3. Connect the other end of the modem/printer cable to the port labeled "TO COMPUTER" on the back of the 500 interface box.
  4. Insert the AC adapter plug into the back of the 500 interface. Plug the AC adapter into a standard AC power outlet.
  5. Switch the interface on using the power switch on the back of the interface. The green light will illuminate on the front on the interface.
  6. Turn on the computer.
  7. Install the Science Workshop software.

Creation Date: 01/1/2000
Last Modified: 01/1/2000
Mod Summary: