A wireless way to measure tension and compression forces in PASCO Structures while also providing acceleration data for all three dimensions plus the resultant. Included in the Building Better Bridges Kit.
See the Buying Guide for this item's required, recommended, and additional accessories.
The Wireless Load Cell and Accelerometer is designed to measure loads in all PASCO Structures Systems. It is particularly useful for measuring vibrations because it includes an accelerometer and has no wires to impede movement.
|Load Cell Range||±50 N|
|Load Cell Resolution||0.03 N|
|Load Cell Accuracy||0.1 N|
|Load Cell Maximum Sample Rate||2 kHz|
|Acceleration Range||± 16 g (three axis)|
|Acceleration Maximum Sample Rate||500 Hz|
|Measurements||Force; Acceleration (3 axes and resultant)|
|Connectivity||Direct USB or via Bluetooth 4.0|
Battery & Logging
|Stored Data Points Memory (Logging) 1||>20,000|
|Battery - Connected (Data Collection Mode) 2||>40 hr|
|Battery - Logging (Data Logging Mode) 3||NA|
1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.
2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
This product can connect directly to your computer or device with the following technologies. No Interface required. See the following guide for details regarding device compatibility: Wireless Bluetooth Product Compatibility »
Dedicated Datalogging with SPARK LXi
Consider an all-in-one, touchscreen data collection, graphing, and analysis tool for students. Designed for use with wired and wireless sensors, the SPARK LXi Datalogger simultaneously accommodates up to five wireless sensors and includes two ports for blue PASPORT sensors. It features an interactive, icon-based user interface within a shock-absorbing case and arrives packaged with SPARKvue, MatchGraph!, and Spectrometry software for interactive data collection and analysis. It can additionally connect via Bluetooth to the following interfaces: AirLink, SPARKlink Air, and 550 Universal Interface.
|Recommended charging solution for multiple sensors Wireless Sensor Charging Station||PS-3599||$99|
|Required by older computers without bluetooth 4.0 or later USB Bluetooth Adapter||PS-3500||$14|
|Wireless Load Cell and Accelerometer Manual||English||994.56 KB|