Four Point Bending
In this lab, a Four-Point Bend Test is performed on ABS plastic beams from the PASCO Structures System and the Flexural Elastic Modulus for the material...
Compression Testing
In this lab, a compression test is performed on a polyethylene cylinder. Quantities measured include Young's Modulus and the Yield Strength for the material.
Forces in Equilibrium
In this lab, students first compare forces created from weights hanging from a load cell. Then, students will construct simple bridges, add weights, and...
Internal Forces
In Part 1, students learn how to measure tension and compression using a load cell and beams. In Part 2, students construct a bridge, then, study tension...
Moments in Equilibrium
In this lab, students construct a bridge to explore moments in equilibrium. Students will move weights across their structure, measure reaction forces,...
Strength of Members
In this lab, students use a force sensor to study the force limits of samples varying in length and thickness. Students will analyze the impacts of compression...
Truss Analysis
In this lab, students construct bridges and measure the forces in each member to develop a deeper understanding of compression and tension within a structure.
Copyright Disclaimer: Section 107 of the Copyright Act of 1976 makes allowance for “fair use” for purposes of teaching, scholarship, education and research. Reproduction under any other circumstances, without the written consent of PASCO, is prohibited.