College / Engineering

Four Point Bending

In this lab, a Four-Point Bend Test is performed on ABS plastic beams from the PASCO Structures System and the Flexural Elastic Modulus for the material is calculated.

Preview Download

	21_Four-Point-Bending.cap	3.74 MB
	21_Four-Point-Bending.pdf	2.02 MB

Featured Equipment

Digital Calipers

This metric/Imperial digital caliper (15 cm or 6 inch) measures to the nearest 0.01 mm (0.0005 inch). It features automatic power down and it includes a sturdy, protective plastic case.

Four-point Load Anvil

Combine the anvil with the Bending Accessory and perform both three-point and four-point bending on the Materials Testing System.

Bending Accessory

Perform three-point bending tests of various metals.

Materials Testing Machine

This is the assembly-only version; measures force and displacement for various materials as the materials are stretched, compressed, sheared, or bent.

Flat Structures Members

Flat members provide lateral support in bridges and can be used to build flexible buildings.

Many lab activities can be conducted with our Wireless, PASPORT, or even ScienceWorkshop sensors and equipment. For assistance with substituting compatible instruments, contact PASCO Technical Support. We're here to help.
Copyright © 2018 PASCO

Copyright Disclaimer: Section 107 of the Copyright Act of 1976 makes allowance for “fair use” for purposes of teaching, scholarship, education and research. Reproduction under any other circumstances, without the written consent of PASCO, is prohibited.

Source: Lab #21