The Calcium Ion Selective Electrode has been discontinued and is no longer available for purchase. PASCO recommends the following alternative:
Contact PASCO Technical Support for additional recommendations or questions regarding this product.
The Calcium Ion Selective Electrode is designed to measure calcium concentration in an aqueous solution.
The PASCO family of Ion Selective Electrodes support either point readings or continuous monitoring of specific ion concentrations in water.
A two-meter cable is included.
Advanced Chemistry Procedures Required
PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures.
- Determine the concentration of a specific ion in a solution
- Water quality studies
- 1x Calcium Ion Selective Electrode
- 1x 2-meter cable
|Electrode Type||Calcium (Ca+2)|
|Molar Range||1.0 - 5x10-6|
|Interfering Ions||Pb+2, Hg+2, Cu+2, Ni+2|
|Requires One Of These||P/N||Price|
|For use with PASPORT. PASPORT High Precision pH/Temperature with ISE/ORP Amplifier||PS-2147||$160|
|For use with PASPORT. PASPORT Chemistry Sensor||PS-2170||$110|
|Oxidation Reduction Potential Probe||CI-6716||--|
|Ammonium Ion Selective Electrode||CI-6717||$150|
|Carbon Dioxide Ion Selective Electrode||CI-6726||$150|
|Fluoride Ion Selective Electrode||CI-6728||--|
|Potassium Ion Selective Electrode||CI-6733||$150|
|Nitrate Ion Selective Electrode||CI-6735||$150|
|Calcium Ion Selective Electrode Manual||English||739.44 KB|
|Potassium Chloride Fill Soln 699 06494 Safety Data Sheet||English||100.94 KB|