The Carbon Dioxide Ion Selective Electrode has been discontinued and is no longer available for purchase. PASCO recommends the following alternative:
Contact PASCO Technical Support for additional recommendations or questions regarding this product.
Product Summary
The Carbon Dioxide Selective Electrode is designed to measure the concentration of carbon dioxide in an aqueous solution.
The PASCO family of Ion Selective Electrodes support either point readings or continuous monitoring of specific ion concentrations in water.
A two-meter cable is included.
Advanced Chemistry Procedures Required
PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures.
Product Specifications
Concentration Range | 1x10-2 M to 1x10-4 M CO (440 ppm to 4.4 ppm CO) |
pH Range | 4.8 to 5.2 |
Temperature Range | 0° C to 50° C |
Inner Body Resistance | -1000 MΩ |
Reproductivity | ±2 % |
Size | 110 mm Length 12 mm diameter 1 m cable length |
Storage | store electrodes in 0.1 M NaCl |
Buying Guide
Requires One Of These | P/N | Price |
---|---|---|
For use with PASPORT. PASPORT High Precision pH/Temperature with ISE/ORP Amplifier | PS-2147 | $165 |
For use with PASPORT. PASPORT Chemistry Sensor | PS-2170 | -- |
Also Available | P/N | Price |
---|---|---|
Ammonium Ion Selective Electrode | CI-6717 | $150 |
Calcium Ion Selective Electrode | CI-6727 | $150 |
Nitrate Ion Selective Electrode | CI-6735 | $150 |
Potassium Ion Selective Electrode | CI-6733 | $150 |
Oxidation Reduction Potential Probe | CI-6716 | -- |
Support Documents
Manuals | ||
---|---|---|
Carbon Dioxide Ion Selective Electrode Manual | English - 351.63 KB | |
Safety Sheets | ||
Sodium Bicarb Soln 0.1m 699 08664 Safety Data Sheet | English - 100.92 KB |