This ISE connects to the Wireless pH Sensor and allows students to measure the concentration of Calcium ions in aqueous solutions.
- 1x 2m cable
See the Buying Guide for this item's required, recommended, and additional accessories.
This ISE connects to the Wireless pH Sensor and allows students to measure the concentration of Calcium ions in an aqueous solutions.
This ISE utilizes a standard PVC membrane. As with all ISE implementing this design, the lifespan of the membrane is limited. For this reason we offer replacement sensor modules (PVC matrix sensor type) which allow you to periodically replace the module, rather than the whole electrode.
PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures. For this reason they are not recommended for use by elementary or middle school students.
- 1x 2m cable
|Range||1 to 40,000 ppm or mg/L|
|Electrode slope||26 ± 2 mV/ decade|
|Interfering ions||Pb2+, Hg2+, Si2+, Fe2+, Cu2+, Ni2+, NH3, Na+, Li+, Tris+, K+, Ba2+, Zn2+, Mg2+|
|Electrode type||PVC Membrane|
|1x Wireless pH Sensor||PS-3204||$79|
|Calcium ISE Probe Manual||English||276.88 KB|
|Calcium ISE - Safety Data Sheet||English||264.63 KB|
|Calcium Reference Fill Solution - Safety Data Sheet||English||246.87 KB|
|Calcium Standard Solution - Safety Data Sheet||English||225.66 KB|