Motion Sensor Guard - SE-7256

SE7256_inUse_MAIN.jpg

Overview

Use this wire guard to protect the Motion Sensor when dropping objects from above. The guard will not interfere with your data collection.

The Motion Sensor Guard (SE-7256) is an accessory for the:

How It Works

When placed over the Motion Sensor, the wires of the guard are within the sensor's 15 cm "dead zone". Therefore, it can provide protection falling objects without interfering with the sensor's position, velocity, or acceleration measurements.

Specifications

Dimensions
  • 12"Diameterx 4.25 “H Chrome plated steel wire basket