Create an improved version of the meter stick balance by mounting the Pivot on a rod stand and using an aluminum meter stick. The meter stick clamp has a built-in bubble level to indicate when the meter stick is balanced.
The meter stick clamp fits onto either the provided dual-ball bearing Pivot or a Rotary Motion Sensor. It has two mounting points: One is centered on the center of the meter stick for rotation and pendulum experiments and the other is offset so the center of mass of the meter stick is below the pivot point for stability in meter stick torque experiments. There is a built-in bubble level to make it obvious when the meter stick is balanced.
Featured Products:
Meter Stick Torque Set • ME-7033: www.pasco.com/products/lab-apparatus/mechanics/statics-materials-and-strain/me-7033
Meter Stick Torque Mass Hanger Set • ME-7035: www.pasco.com/products/lab-apparatus/mechanics/statics-materials-and-strain/me-7035
Pivot • ME-7034: www.pasco.com/products/lab-apparatus/mechanics/centripetal-force-and-rotation/me-7034
Aluminum Meter Sticks (6-pack) • ME-7032: www.pasco.com/products/lab-supplies/measurement/me-7032
