Conservation of Momentum in Explosions
The purpose of this experiment is to demonstrate conservation of momentum with two carts pushing...
Franck-Hertz Experiment
Electrons are accelerated by applying a known potential between two grids inside the argon tube. When an electron has sufficient kinetic energy to excite...
Induction - Magnet through a Coil
This experiment shows the Electromotive Force (EMF) induced in a coil when a magnet is dropped through the center of the coil.
Transistor Lab: Common-Emitter Amplifier
The purpose of this experiment is to investigate the voltage and current amplification characteristics...
Current Gain: NPN Emitter-Follower Amplifier
The purpose of this experiment is to investigate the DC transfer characteristics of the npn transistor,...
NPN Transistor as a Digital Switch
The purpose of this experiment is to investigate how the npn transistor operates as a digital switch.
Diode Lab - Part Two
In this experiment, you will use diodes to rectify an AC signal and to build part of the basic circuitry of a power supply.
Diode Lab - Part One
In this experiment, you will investigate the properties of various types of diodes.
LRC Circuit
The purpose of this experiment is to study resonance in an inductor-resistor-capacitor circuit (LRC circuit) by examining the current through the circuit...
LR Circuit
This experiment displays the voltages across the inductor and resistor of an inductor-resistor circuit (LR circuit) and the current through the inductor,...
Copyright Disclaimer: Section 107 of the Copyright Act of 1976 makes allowance for “fair use” for purposes of teaching, scholarship, education and research. Reproduction under any other circumstances, without the written consent of PASCO, is prohibited.