How do you mount the CI-6537 force sensor to a cart?
|The CI-6537 force sensor has two built-in mounting screws that align with the threaded holes in the accessory tray of PASCO dynamics and collision carts. The screws are spring loaded so they remain in a retracted position when not in use. To mount the CI-6537 force sensor, position it in the accessory tray of the cart. Insert a size #0 screwdriver into the hole in the force sensor and push down until the screw extends into the threaded hole on the cart. Turn the screwdriver clockwise until the screw is tight. Repeat for the other screw.|
Creation Date: 01/1/2000
Last Modified: 02/11/2003