Tech Note 369 Detail

No voltage and value readings appear in the calibration window.

Affected Products:

CI-6870 DataStudio, Single User

Problem/Symptom:
No voltage and value readings appear in the calibration window of DataStudio 1.8.0 on a Macintosh when using an analog sensor on a ScienceWorkshop 500 interface via a CI-6759 USB/Serial converter.

PASCO Solution:
Either upgrade to DataStudio 1.8.5+ or replace the Mac SW500 plug-in with the file below:
File Downloads:
SW500.hqx - ( 319 KB )
SW500 Driver

Creation Date: 01/22/2003
Last Modified: 09/26/2003
Mod Summary: