Tech Note 188 Detail

Hardware setup (Macintosh)

Affected Products:

CI-6665A ScienceWorkshop 300 Interface

Problem/Symptom:
How do I setup my Science Workshop 300 interface?

PASCO Solution:
  1. With your computer turned off, locate the modem or printer port on the back of your computer.
  2. Connect either end of the modem/printer cable (included with the 300 interface) to the port on your computer. The cable is keyed so that you cannot plug it in incorrectly.
  3. Connect the other end of the modem/printer cable to the port labeled "TO COMPUTER" on the back of the 300 interface box.
  4. Insert the AC adapter plug into the back of the 300 interface. Plug the AC adapter into a standard AC power outlet.
  5. Switch the interface on using the power switch on the back of the interface. The green light will illuminate on the front on the interface.
  6. Turn on the computer.
  7. Install the DataStudio software.

Creation Date: 01/1/2000
Last Modified: 01/1/2000
Mod Summary: