Tech Note 1226 Detail

Test AP-8209 Power Supply

Affected Products:

AP-8209 Photoelectric Effect Apparatus

Problem/Symptom:
Test AP-8209 Power Supply

PASCO Solution:

Troubleshooting: AP-8209

CAUTION: The procedure below may expose the tester to voltages as high as 35 VAC.

Power Supply Check

  1. Unplug the power supply cable from the main device.
  2. Being sure not to touch the pins, insert the multimeter probes into pin hole 1 and 2 of the power supply cable.
  3. The A.C. Voltage should be approximately 35V.
  4. The A.C. Voltage for pin hole 3 and 5 should be approximately 24V.

Creation Date: 10/11/2013
Last Modified:
Mod Summary: