Tech Note 1107 Detail

Exporting mulitple runs with desired precision.

Affected Products:

CI-6870G DataStudio Software (Single User)
CI-6859C DataStudio, Classroom License
CI-6871G DataStudio Software (Site License)

Problem/Symptom:
Cannot export data with desired precision.

PASCO Solution:

Change the settings for the sensor of interest to the desired precision.

  1. Double click on the icon for the sensor under the MEASUREMENTS column on the left hand side of the screen.
  2. Select the NUMERIC tab.
  3. Use the radio buttons and the arrows to set the desired precision for the sensor. (Note: it is possible to set the precision above that provided by the sensor).

Exporting Data

  1. Create a table display that contains all of the data that you want to export. It does not matter if all of the values are clearly visible within DataStudio. These values will have all of their digits displayed within the exported file.
  2. Within the Main Menu Bar for DataStudio, select DISPLAY-->EXPORT DATA.
  3. When you are on the screen where DataStudio prompts you for the name of the file to Export to, please hold the ALT button as you click the SAVE button. This will cause all of the data that is displayed in the table to be exported to a single file.

Creation Date: 09/16/2010
Last Modified: 10/12/2010
Mod Summary: