Tech Note 1044 Detail

"Unsupported mode" error when certain modes are accessed on the Smart Timer.

Affected Products:

ME-8930 Smart Timer

Problem/Symptom:
"Unsupported mode" error when certain modes are accessed on the Smart Timer.

PASCO Solution:
  1. Open the case by removing the two thumbscrews from the back of the unit.
  2. Flip the switch on the bottom of the circuit board to the "unlock" position. If the switch appears to already be in the "unlock" position, operate the switch a few times to remove any oxides from the switch and then leave it in the "unlock" position.
  3. If you still experience problems, please contact Teacher Support.

Creation Date: 09/23/2009
Last Modified:
Mod Summary: