Our Experiment Library contains hundreds of free experiments and lab activities designed to engage students in active learning. Search by subject, grade level, or topical keywords. Download editable student labs, teacher notes with setup instructions, SPARKvue or Capstone software configuration files, and more, all for free!

Showing 22 experiments that use the Materials Testing Machine.

College / Engineering

Introduction to Materials Tester

This is a general introduction to PASCO's Material Testing Machine (ME-8236) to show how to set up the machine, make measurements, and use accessories.

College / Engineering

Compliance Calibration Tutorial

This tutorial takes you through all the steps of calibrating the Material Testing Machine.

College / Engineering

Tensile Testing

In this lab, brass will undergo a tensile test. Quantities measured include Young’s Modulus, Yield Strength, Tensile Strength, Ductility, and Modulus...

College / Engineering

Young's Modulus

In this lab, students will collect stress vs. strain data for a test sample in the elastic region. Several runs will be taken for the same sample to calculate...

College / Engineering

Tensile Testing - Annealed Steel

This lab investigates what effect annealing has on the properties of material. Properties measured for both samples include Young’s Modulus, Yield Strength,...

College / Engineering

Tensile Testing - Metals

The properties measured for steel, brass, and aluminum include Young’s Modulus, Yield Strength, Tensile Strength, Ductility, and Modulus of Toughness.

College / Engineering

Tensile Testing - Plastic Samples

In this lab, tensile tests are completed on two types of plastic and the stiffness of the materials is measured using several different methods.

College / Engineering

Tensile Testing - Plastic Coupons

Measure the stiffness of the materials using several different methods, in addition to determining the tensile strength. Plastics tested are ABS, Nylon,...

High School / Engineering

Three Point Bending

In this lab, a Three-Point Bend test is performed on a round rod. The distance between the anvils is varied, and the resulting effect on the stiffness...

College / Engineering

Round Rod Bending

In this lab, a three-point bend test is performed on a round rod. The Flexural Elastic Modulus for the material is calculated. Materials tested include...

Copyright Disclaimer: Section 107 of the Copyright Act of 1976 makes allowance for “fair use” for purposes of teaching, scholarship, education and research. Reproduction under any other circumstances, without the written consent of PASCO, is prohibited.