This ISE connects to the Wireless pH Sensor and allows students to measure the concentration of potassium ions in an aqueous solution.
- 1x 2m cable
See the Buying Guide for this item's required, recommended, and additional accessories.
This ISE connects to the Wireless pH Sensor and allows students to measure the potential and determine the concentration of ammonium ions in an aqueous solution.
This ISE utilizes a standard PVC membrane. As with all ISE implementing this design, the lifespan of the membrane is limited. For this reason we offer replacement sensor modules (PVC matrix sensor type) which allow you to periodically replace the module, rather than the whole electrode.
PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures. For this reason they are not recommended for use by elementary or middle school students.
- 1x 2m cable
|Range||1 to 39,000 ppm or mg/L|
|Electrode slope||56 ± 3 mV/ decade|
|Interferances||Cs+, NH4+, Tl+, H+, Ag+, Tris+, Li+, Na+|
|Electrode type||PVC Membrane|
|1x Wireless pH Sensor||PS-3204||$81|
|Potassium ISE Probe Manual||English - 275.20 KB|
|Potassium ISE - Safety Data Sheet||English - 221.29 KB|
|Potassium Reference Fill Solution - Safety Data Sheet||English - 293.89 KB|
|Potassium Standard Solution - Safety Data Sheet||English - 224.89 KB|