The Wireless Pressure Sensor allows students to easily collect accurate gas pressure data for a wide range of applications. Included is a 60cc syringe, tubing, and connectors that facilitate experiments such as Boyle's Law or measuring pinch-grip strength. Within PASCO's software, students can easily select their desired units from a list containing kPa, mmHg, inHg, mbar, psi, atm, and torr.
Perform These Experiments
- Study Boyle's law and Charles' Law
- Investigate pinch-grip strength and muscle fatigue
- Monitor plant transpiration when setup as a potometer
- Study enzyme reactions using hydrogen peroxide and catalase
- 2x 2 Feet of polyurethane plastic tubing
- 1x Tube Connector
- 2x Male Barbed Luer Locks
- 1x Female Barbed Luer Lock
- 1x 60 cc Syringe
- 1x Micro USB Cable (PS-3584)
|Range||0-400 kPa (values under 20 kPa may not be reliable)|
|Max sample rate||1000 Hz|
Battery and Logging
|Stored Data Points Memory (Logging) 1||>30,000|
|Battery - Connected (Data Collection Mode) 2||>30 hr|
|Battery - Logging (Data Logging Mode) 3||1.5 days|
|Battery Type||Rechargeable LiPo|
1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.
2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
This product can connect directly to your computer or device with the following technologies. No Interface required. See the following guide for details regarding device compatibility: Wireless Bluetooth Product Compatibility »
- Bluetooth Low Energy (BLE)
- Universal Serial Bus (USB)
|Wireless Sensor Storage Tray for Pressure Sensors||PS-3586||$35|
|Recommended charging solution for multiple sensors Wireless Sensor Charging Station||PS-3599||$89|
|Pressure Sensor Accessories Kit||PS-3503||$50|
|USB Bluetooth Adapter||PS-3500||$14|
|Single Port USB Wall Charger||PS-2575A||$20|
Perform the following experiments and more with the Wireless Pressure Sensor.
Visit PASCO's Experiment Library to view all activities for this product.
In this lab, students investigate the catalyzed decomposition of hydrogen peroxide by catalase or peroxidase using a pressure sensor to monitor the rate of the reaction. For a more inquiry-based investigation, students can manipulate...
In this lab, students will use absolute pressure sensors to investigate how changes in the volume of a confined gas with constant temperature affects pressure.
In this lab, students will use temperature and absolute pressure sensors to measure changes in pressure inside a flask of fermenting yeast cells at two different temperatures.
Use an absolute pressure sensor to learn about the components of air and how to determine the percent of oxygen in air.
In this lab, students will use light and absolute pressure sensors to measure changes in light and pressure in an aquatic ecosystem as an Elodea or other aquatic plant undergoes photosynthesis.
In this lab, students will use temperature and absolute pressure sensors to measure changes in temperature and pressure during an oxidation reaction.
|Wireless Pressure Sensor Reference Guide||English||439.26 KB|