Clear PVC Venturi Tube with a constriction and two pressure ports with tubing attached, for use in a pipe network.
The Venturi Tube is made of clear PVC so the water can be seen flowing through it. It has a constriction and two pressure ports with tubing attached. The Venturi Tube is connected to the General Flow Sensor by the matching couplers. The General Flow Sensor measures the difference in fluid pressure between the two different cross-sectional areas and the software does a calculation to convert this pressure difference into a velocity or volumetric flow rate. The Venturi Tube slip joints are designed to be glued into any 3/4” PVC pipe network.
|Distance between leveling feet||25 cm|
|Distance from each leveling foot to the vertex of the A-frame||26 cm|
|Diameter of rods supported||6.3 mm to 12.7 mm (1/4 inch to 1/2 inch)|
|Threaded rods supported||3/8" to 1/2" - 13 thread rods|
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
This product requires a PASCO Interface to connect to your computer or device. We recommend the following option(s). For a breakdown of features, capabilities, and additional options, see our Interface Comparison Guide »
|Venturi Tube Instruction Sheet||English||222.84 KB|