Product Summary
The Wireless Drop Counter has a wider (18 x 13 mm) drop window for better drop detection and easier alignment with burettes. It works equally well with large or small, fast or slow drops.
Measures up to 10 drops per second with drops as small as 0.5 mm.
Teaching Advantage
- IR filter assures accurate counts because room lighting cannot affect results
- Sensor unit can suspend up to three other probes in solution, simplifying many experiments
- Wider drop window (18x13mm) means better drop detection and easier alignment with burettes
What's Included
- 1x Wireless Drop Counter
- 1x Micro Stir Bar
- 1x Drop Dispenser with Stopcock
- 1x Plastic Dispenser Rod Clamp
Product Specifications
| Maximum Drop Count Rate | 10 Drops/ second |
| Exterior Case Made From ABS |
| Optical Window Made From Acrylic |
Battery and Logging
| Stored Data Points Memory (Logging) 1 | Not Supported |
| Battery - Connected (Data Collection Mode) 2 | >260 hr |
| Battery - Logging (Data Logging Mode) 3 | Not Supported |
| Battery Type | LiPo |
1 Minimum # of data points with all measurements enabled, actual results depend on enabled measurements.
2 Continuous use in a connected state until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
3 Logging until battery failure, actual results will depend on sample rate, active measurements, and battery condition.
* Normal classroom use is the sensor in active use for 20min/lab for 120 lab periods/yr.
Software Required
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
Connectivity Options
This product can connect directly to your computer or device with the following technologies. No Interface required. See the following guide for details regarding device compatibility: Wireless Bluetooth Product Compatibility »
Experiment Library
Perform the following experiments and more with the Wireless Drop Counter.
Visit PASCO's Experiment Library to view all activities for this product.
Advanced Placement / Chemistry
In this lab, students use a drop counter, conductivity sensor, and a temperature sensor to determine the concentration of dissolved ions by titration.
High School / Chemistry
In this lab, students will use a drop counter and pH sensor to determine the concentration of a sodium carbonate solution. Students will learn that chemical reactions can be the sum of several individual reactions.
Advanced Placement / Chemistry
In this lab, students will use a drop counter and pH sensor to titrate monoprotic and polyprotic weak acids. Then they'll determine the relationship between the shapes of the curves and Ka.
High School / Chemistry
Students will use a pH sensor and a drop counter to explore the shape of a titration curve produced by a strong acid and a weak acid when titrated by a strong base.
Advanced Placement / Chemistry
Students use a pH Sensor and drop counter to determine the fundamental shape of a titration curve and the parameters that can cause it to change.
High School / Chemistry
In this lab, students will complete a titration to determine the amount of chloride ion in water samples.
