The Wireless AC/DC Module is a Bluetooth Low Energy wireless signal generator designed for use with PASCO’s Modular Circuits.
- 1x Micro USB Cable
The Wireless AC/DC Module is a Bluetooth Low Energy wireless signal generator designed for use with PASCO’s Modular Circuits. The AC/DC Module can act as a DC power supply, as well as generate Sine, Triangle, and Square AC signals. A built-in rechargeable battery provides long lasting power for your basic circuits, and is rechargeable using the included USB cable. An internal voltage sensor monitors the output voltage at all times. The Wireless AC/DC Module is controllable in either PASCO Capstone or SPARKvue software. This latest circuit module expands the number and type of experiments you can perform with Modular Circuits including Ohm’s Law, RC Circuit Time Constant, and LRC labs.
Programmable using Blockly programming in PASCO Capstone 2 software.
- Compatible with Modular Circuits
- ±3V Output; 0.3 A Max
- DC, Sine, Triangle, Square
- Bluetooth Low Energy
- Rechargeable Battery
- Controllable with PASCO Capstone or SPARKvue Software
|Output Types||DC, Sine, Triangle, Square|
|Output||± 3 V|
|Maximum Current||300 mA|
|Output Resolution||10 mV|
|Output Frequency||0.1 Hz to 10 kHz|
|Output Frequency Resolution||10 mHz|
|Battery||Rechargeable Lithium-Polymer 1000 mA|
|Protection||Overcurrent, Overtemperature and Back EMF|
|Connectivity||USB or Bluetooth® Low Energy|
|Max wireless range||30 m (unobstructed)|
|Max Sample Rate for Output Voltage||100 kHz|
This product requires PASCO software for data collection and analysis. We recommend the following option(s). For more information on which is right for your classroom, see our Software Comparison: SPARKvue vs. Capstone »
This product can connect directly to your computer or device with the following technologies. No Interface required. See the following guide for details regarding device compatibility: Wireless Bluetooth Product Compatibility »
- Bluetooth Low Energy (BLE)
- Universal Serial Bus (USB)
Perform the following experiments and more with the Wireless AC/DC Module.
Visit PASCO's Experiment Library to view more activities.
Students measure the current and voltage across a resistor while varying the output voltage. A graph of voltage vs current will reveal Ohm's Law.
Students investigate the properties of a transistor with current and voltage sensors. They use their observations to describe the behavior of a transistor. They create a circuit to amplify the current produced by a solar cell...
Students measure the current and voltage across a resistor while varying the output voltage, A graph of voltage versus current will reveal Ohm's Law.
Students investigate the properties of a diode with current and voltage sensors. They use their observations to describe the behavior of a diode.
|Wireless AC/DC Module Manual||English - 483.90 KB|