Demonstration Motor/Generator Set - SF-7216

SF7216_MAIN.jpg

Used as a generator, crank the handle to light a bulb or display the generated voltage on the meter

Overview

This sturdy kit clearly demonstrates single-phase AC and DC generators and DC motors. The brushes can be adjusted on the commutator to convert the generator from AC to DC.

Includes

  • Coil holder with commutator
  • Coil, 800 windings
  • Laminated core
  • Commutator contact spring (2)
  • Base rail: 37 cm long
  • Carrier with 10 mm diamter hole (4)
  • Magnet mount (2)
  • Bar magnets (2): 100 x 10 x 10 mm
  • Manual drive pulley
  • Drive belts, set of 4 different
  • Instructions
  • Buying Guide

    1555
    SE-9720A
    Power Supply (18 VDC, 5 A)
    1
    629561
    UI-5000
    850 Universal Interface
    1
    Required - One of the following

    To power the DC motor you can use either a dedicated DC power supply or an 850 Universal Interface

    Power Supply (18 VDC, 5 A)   SE-9720A
    850 Universal Interface   UI-5000
    1815
    SE-9750
    Banana Plug Cord-Red (5 Pack)
    1
    1581
    SE-9786A
    Basic Digital Multimeter
    1
    Required

    Aslo required are patch cords and a multimeter to measure the voltage produced by the generator

    Banana Plug Cord-Red (5 Pack)   SE-9750
    Basic Digital Multimeter   SE-9786A