Calcium Ion Selective Electrode - PS-3518

PS3518_MAIN.jpg

Overview

This ISE connects to the Wireless pH Sensor and allows students to measure the concentration of Calcium ions (Ca2+) in an aqueous solutions.

This ISE utilizes a standard PVC membrane. As with all ISE implementing this design, the lifespan of the membrane is limited. For this reason we offer replacement sensor modules (PVC matrix sensor type) which allow you to periodically replace the module, rather than the whole electrode.

PASCO Ion Selective Electrodes are industrial-quality probes that give excellent results when properly used. Operation of these Ion Selective Electrodes assumes training in the safe handling of flammable, caustic and corrosive chemicals and a working knowledge of serial dilution and calibration procedures. For this reason they are not recommended for use by elementary or middle school students.

The Calcium Ion Selective Electrode (PS-3518) is an accessory for the:

Includes

  • Probe
  • Probe module
  • Videos

    Specifications

    Range
    • 1 to 40,000 ppm or mg/L
    pH range
    • 2-8
    Electrode slope
    • 26±2 mV/ decade
    Interfering ions
    • Pb2+, Hg2+, Si2+, Fe2+, Cu2+, Ni2+, NH3, Na+, Li+, Tris+, K+, Ba2+, Zn2+, Mg2+
    Electrode type
    • PVC Membrane
    Length
    • 155 mm
    Diameter
    • 12 mm
    Connector
    • BNC

    Buying Guide

    2784621
    SC-3524
    Calcium ISE Solutions
    1
    Consumables
    Calcium ISE Solutions   SC-3524