PASPORT Displacement Sensor - PS-2204

PS2204_MAIN.jpg

Displacement Sensor shown in use with PASCO Structures System and Hooked Mass Set.

Overview

The Displacement Sensor is ideal for measuring small deflections such as those resulting from a load applied to a truss, bridge or other construction  using any of the PASCO Structures Systems.  

The digital indicator can be used as a standalone device to measure displacements and show them on its four and one-half digit LCD display.  When connected to the sensor and using an interface these measurements can be transferred for analysis using the PASCO software.

 

Includes

  • Digital Indicator
  • Sensor
  • Pivot Rod Clamp
  • Back Plug Panel
  • Phillips screwdriver #0
  • Storage box for clamp, panel and screwdriver
  • Specifications

    Measurement Range
    • 10 mm
    Hysteresis Error
    • ±0.02 mm
    Resolution
    • 0.013 mm
    Default Sample Rate
    • 5 Hz
    Maximum Speed of Measured Object
    • ± 0.6 m/s
    Maximum Travel
    • 10 mm
    Working Humidity
    • ≤ 80%
    Storage Temperature
    • -10 to +60 °C

    Buying Guide

    Interface Required

    To use this product you need a PASCO interface. 

    New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

    Software Required

    This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.