100 N Load Cell - PS-2200

PS2200_inUse_MAIN.jpg

Overview

The 100 N Load Cell is a component of the PASCO Structures System series.

Connect a Load Cell to any part of your structure and measure forces in real time.

Load Cells are connected to a Load Cell Amplifier which is available separately (PS-2198) or in the Load Cell & Amplifier Set (PS-2199) which includes 4 Load Cells.

For measuring smaller tensions and compressions a 5N Load Cell is also available.

 

The 100 N Load Cell (PS-2200) is an accessory for the:

Specifications

Range
  • -100 N to +100 N
Accuracy
  • ± 1% (± 1 N)
Resolution
  • 0.02 N
Safe Overload
  • - 150 N to + 150 N
Dimensions
  • 5.3 cm by 5.8 cm by 2.0 cm
Cable Length
  • 120 cm
Mass
  • approximately 100 g

Buying Guide

57672
PS-2198
PASPORT Load Cell Amplifier
1
58427
PS-2205
PASPORT Dual Load Cell Amplifier
1
Required - One of the following

Load Cells must be connected to a Load Cell Amplifier which then must be connected to a PASCO interface.

PASPORT Load Cell Amplifier   PS-2198
PASPORT Dual Load Cell Amplifier   PS-2205

Interface Required

To use this product you need a PASCO interface. 

New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

Software Required

This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.