PASPORT High Current Sensor - PS-2193

PS2193_inuse_MAIN.jpg

Overview

The PASPORT High Current Sensor has a low (0.01 Ω) resistance sensing element, can measure up to 10 A, and has an LED over-current indicator. Dynamic variable over-sampling greatly reduces the measurement noise at low sample rates.

Features

  • 10 Amp
  • Over-Current LED

Specifications

Measurable Current Range
  • ±10 A
Measurement Resolution
  • 16 bits (approx. 300µA)
Maximum circuit Voltage
  • 10 V above or below earth ground
Measurement Accuracy
  • 0.5 % or 2.5 mA, whichever is greater
Maximum Sample Rate
  • 1000 Hz
Maximum Continuous Current without Damage
  • 12 A
Maximum Continuous Circuit Overvoltage without Damage
  • 40 V above or below earth ground

Buying Guide

1815
SE-9750
Banana Plug Cord-Red (5 Pack)
1
Accessories
Banana Plug Cord-Red (5 Pack)   SE-9750

Interface Required

To use this product you need a PASCO interface. 

New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

Software Required

This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.