PASPORT Dual Pressure Sensor - PS-2181

PS2181_inUse_MAIN.jpg

Shown in use with the PASCO Heat Engine/Gas Law Apparatus

Overview

The PASPORT Dual Pressure sensor is capable of reading 2 absolute pressures, 1 gauge pressure, or 1 differential pressure. Dynamic variable over-sampling automatically reduces the measurement noise at low sampling rates. Sample rates up to 1000 Hz make studies of both transient and steady- state pressure possible. Includes quick-connect tubing.

Typical Applications

  • Measure pressure in a Heat Engine
  • Measure pressure drops in pipes
  • Measure pressure on both sides of PASCO's Diffusion/Osmosis Apparatus
  • Study gauge and differential pressures

Includes

  • Quick-release Connectors (4)
  • Tubing Connectors (4)
  • Polyurethane Tubing (2.4 m)
  • Specifications

    Absolute Pressure
    • 0 to 200 kPa, 0.01 kPa resolution at 10 Hz and 1 kPa repeatability
    • Displays Pressure in kPa, N/m2, and psi
    Differential Pressure
    • ±100 kPa, 0.01 kPa resolution at 10 Hz and 1 kPa repeatability
    • Displays pressure in kPa, N/m2, and psi
    Maximum Sample Rate
    • 1000 Hz

    Videos

    Buying Guide

    53164
    PS-2500
    PASPORT Sensor Extension Cable
    1
    Accessories
    PASPORT Sensor Extension Cable   PS-2500

    Interface Required

    To use this product you need a PASCO interface. 

    New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

    Software Required

    This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.