PASPORT Conductivity Sensor - PS-2116A

Go Wireless!

Recommended Alternative — The Wireless Conductivity Sensor can perform most* of the functions of the PASPORT Conductivity Sensor at a lower price. Best of all, it connects directly** to your computers, tablets, smartphones and Chromebooks without the need for an interface and with no cables to get in the way.

*The Range is lower: 0-20,000 us/cm vs. 0-100,000 us/cm and accuracy is ± 10% of reading vs ± 2% of scale.

**Devices without native Bluetooth® Smart connectivity will require a low cost USB adapter - see the product page for details.

PS2116A_LG.jpg

Overview

Most Conductivity Sensors use graphite probes, but our Conductivity Sensor uses platinum for greater range and improved accuracy at high and low concentrations.The result is better measurements that lead to better labs. Three ranges, push-button selectable on the sensor, allow it to be used for a wider variety of experiments without requiring recalibration.

  • Electrode houses rugged, research-grade conductors that provide superior accuracy over the entire range.
  • 0-100,000 µS/cm ranges allows conductivity measurement in order to calculate salinity from "fresh" water to sea water.
  • Replaceable probe reduces maintenance costs.

Typical Applications

  • Accurately compare conductivity of different water samples
  • Study the effects of chemical flocculants on conductivity
  • Conduct environmental studies
  • Investigate drinking water purity

Special Features

  • Three sensor range via three push-buttons.

Specifications

Ranges
  • 0-1,000 µS/cm
  • 0-10,000 µS/cm
  • 0-100,000 µS/cm
  • All ranges ± 10% accuracy (no calibration) or 0.1% accuracy with calibration
Resolution
  • Better than 0.05% of full scale
Repeatability
  • Better than 0.01% of full scale
Default Sample Rate
  • 2 Hz
Maximum Sample Rate
  • 20 Hz
Operating Temperature
  • 0 - 50 °C

Buying Guide

Required for use with PASPORT
105322
PS-2571
Conductivity Probe, 10X
1
Replacement Parts
Conductivity Probe, 10X   PS-2571

Interface Required

To use this product you need a PASCO interface. 

New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

Software Required

This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.