Large Structures Set - ME-7003

ME7003_MAIN.jpg

Overview

The Large Structures Set includes all the components contained in the Advanced Structures Set plus additional parts to build even bigger structures. It also includes the Mini Cars with plastic track to build roller coasters, and to add realistic roadbeds to your bridges.

  • Add load cells to measure forces anywhere in the structure! 

Includes

  • #6 I-Beam (35 cm) (24)
  • #5 I-Beam (24 cm) (24)
  • #4 I-Beam (17 cm) (54)
  • #3 I-Beam (11.5 cm) (54)
  • #2 I-Beam (8 cm) (24)
  • #1 I-Beam (5.5 cm) (24)
  • Flex #5 I-Beam (24 cm) (10)
  • Flex #4 I-Beam (17 cm) (18)
  • Flex #3 I-Beam (11.5 cm) (18)
  • Flat Beams - 16 each of 3 lengths
  • Axles - 2 each of 3 lengths
  • Connectors (70)
  • Cord Tensioning Clips (32)
  • Yellow and Green cars - each with ballast mass and flag
  • Force Platform Brackets (2)
  • Round and Flat Connectors (6)
  • Angle and Straight Connectors - 24 each
  • Drive Wheel with Rubber Tire (4)
  • Pulleys, O-Rings, Spacers - 12 each
  • Structures Rod Clamps (2)
  • Sliding Connectors (12)
  • PAStrack Fasteners (6)
  • Collets (24)
  • Screws (450)
  • Yellow Cord - 1 roll
  • Flexible Road Bed (9.1 m)
  • Road Bed Clips (24)
  • Track Coupler (2)
  • Instruction Manual
  • Buying Guide

    58500
    ME-7589
    Large Slotted Mass Set (2 kg Set)
    1
    57881
    ME-7566
    Large Slotted Mass Set
    1
    1607
    SE-8759
    Hooked Mass Set
    1
    Add a Mass Set
    Large Slotted Mass Set (2 kg Set)   ME-7589
    Large Slotted Mass Set   ME-7566
    Hooked Mass Set   SE-8759
    57670
    PS-2199
    Load Cell and Amplifier Set
    1
    57671
    PS-2200
    100 N Load Cell
    1
    57672
    PS-2198
    PASPORT Load Cell Amplifier
    1
    Add Measurement Capabilities
    Load Cell and Amplifier Set   PS-2199
    100 N Load Cell   PS-2200
    PASPORT Load Cell Amplifier   PS-2198
    58434
    PS-2204
    PASPORT Displacement Sensor
    1
    Add Sensors
    PASPORT Displacement Sensor   PS-2204

    Interface Required

    To use this product you need a PASCO interface. 

    New to probeware or have questions about  sensors or interfaces? Contact Teacher and Technical Support.  We're here to help!

    Software Required

    This product requires or recommends PASCO software for data collection and analysis. Either SPARKvue software or PASCO Capstone software may be used.