Rotational Inertia Experiment - EX-5516A

EX5516A_MAIN.jpg

Overview

In this experiment designed for use with PASCO Capstone software, the rotational inertias of a ring and a disk are determined by applying a torque to the object and measuring the resulting angular acceleration.

A known torque is applied to the pulley on the Rotary Motion Sensor, causing a disk and ring to rotate. The resulting angular acceleration is measured using the slope of a graph of angular velocity versus time. The rotational inertia of the disk and ring combination is calculated from the torque and the angular acceleration. The procedure is repeated for the disk alone to find the rotational inertias of the ring and disk separately.

PASCO Advantage:

Friction in this compact setup can be neglected in this compact setup. The Rotary Motion Sensor is a versatile tool which can be used in a variety of other experiments.

The rotational inertia of the ring and disk is calculated from the angular acceleration obtained from the slope of this angular velocity vs. time graph.

Buying Guide

1682
SE-8723
Ohaus Triple-Beam Balance (without Tare)
1
1790
SF-8711
Stainless Steel Calipers
1
Required
Ohaus Triple-Beam Balance (without Tare)   SE-8723
Stainless Steel Calipers   SF-8711

Interface Required

A 550 Universal Interface or 850 Universal Interface is required for use with this product.  Compare the 550 and 850.

Have specific questions or need more information? Contact Teacher and Technical Support.  We're here to help!

Software Required

This product requires or recommends PASCO Capstone for data collection and analysis.