1. Connect the 750 Interface to the serial or SCSI port of the computer and plug the Motion Sensor into digital channels 1 and 2.
   
   
2. Place the 1.2m Dynamics Track on a table and level the track. Place a cart at one end of the track and attach a square piece of cardboard to the cart (see photo below).
   
   
3. Place the other cart at the opposite end of the track. Mount the Motion Sensor on the cart using the Cart Accessory Adapter (see photo below).
   
   
   Note: PASPORT sensors are used for experiment configuration purposes only and cannot be used with 500, 700 or 750 interfaces.
   
   
4. Be certain to set the switch on the Motion Sensor to near (cart).
   
   
   

To download the Relative Motion DataStudio file, click on a Windows (Zip file) or Macintosh (Stuffit file).

You are now ready to begin collecting data.