PASCO
 


Experimental Setup for ScienceWorkshop 500- and 750-based Interfaces:

    1. Connect the 500 or 750 Interface to the computer and plug a Voltage Sensor into Analog Channel A and a Current Sensor into Analog Channel B.


    2. Attach the patch cords and 2 AA or 2 AAA non-rechargeable batteries as in the pictures above. Note the patch cords connected above the 10 Ohm resistor.

    3. Keep the switch in the "OPEN" position.

      Download the "Resistance is Futile!" DataStudio files:
          Windows (Zip file) or Macintosh (Stuffit file).

      Download the "Resistance is Futile!" Microsoft Word files:
          Windows (Zip file) or Macintosh (Stuffit file).