PASCO


Experimental Setup:

Please note: Upgrade to the latest Xplorer GLX firmware.

SOFTWARE SETUP:
  1. Download the "PositionMatch.glx" file:
  1. Turn on the GLX .

  2. Using the USB port, connect the GLX to the computer.

  3. Start DataStudio on the computer.

  4. Select the Setup Menu Button

(Note: If the above picture does not appear, press "Select Interface" and choose PASPORT. Open the Experiment Setup window again.)
  1. Double-click the Manage Files icon as in the picture above.
  1. Highlight RAM and select Upload To Xplorer GLX . . .

  2. Navigate to and open the "PositionMatch.glx" file.

  3. Highlight Flash and select Upload To Xplorer GLX . . .

  4. Navigate to and open the "PositionMatch.glx" file.

  5. Press the Home Button to get to the Home screen.

  6. Use the arrow and check buttons to navigate to the Data Files Button .
  1. Select the Position Match file. Press to open the file as in the picture above.
  1. Press the Home Button then to observe the graph above.

HARDWARE SETUP:
  1. Connect the GLX to the Motion Sensor.

  2. Remove both ends of the Adjustable Angle Clamp.
  1. Connect one end of the Adjustable Angle Clamp screw to the back of the GLX as in the picture above.
  1. Connect the bottom of the Motion Sensor to the other end of the Adjustable Angle clamp screw.
  1. Move the switch at the top of the Motion Sensor to the Stick Figure icon.

OPTIONAL DOWNLOADS for "Position Match with the GLX":
  • Microsoft Word files (optional):
    Windows (Zip file) or Macintosh (Stuffit file).