PASCO
 


Experimental Setup for the PASPORT Interface using DataStudio:

    Part 1: Incline
    1. Remove the aluminum slugs from the fan accessory.
    2. Attach the fan accessory to the cart.
    3. Attach the base and rod to one end of the track as in the picture below. Use this end to adjust the angle of the incline.
    Part 2: Level

    1. Carefully level the track as in the picture below.
    2. Connect the USB link to the USB port of the computer and plug the Motion Sensor into the USB link.
    1. Set the switch on the top of the Motion Sensor to "near."
    2. Download the "I'm a Fan of Acceleration" DataStudio file:

      3. PASPORT: Windows (Zip file) or Macintosh (Stuffit file).

    You are now ready to begin collecting data.