PASCO
 


Experimental Setup for PASPORT:

    1. Connect the PASPORT interface to the USB port of the computer and plug the Voltage-Current Sensor into the interface.


    2. Attach the patch cords and 2 AA or 2 AAA non-rechargeable batteries as in the pictures above. Note the patch cords connected above the 10 Ohm resistor.

    3. Keep the switch in the "OPEN" position.

      Download the "Resistance is Futile!" DataStudio files:
          Windows (Zip file) or Macintosh (Stuffit file).

      Download the "Resistance is Futile!" Microsoft Word files:
          Windows (Zip file) or Macintosh (Stuffit file).