1. Connect the USB link to the USB port of the computer and plug the Force Sensor into the USB link.
   
   
2. If the Force Sensor does not have the hook installed on the end, then install the hook. Tie a 30 cm piece of string between the hook of the Force Sensor and the cork friction tray (see photo below).
   
   
   
3. With no force applied to the sensor, push the zero button on the sensor. You only need to do this once!
   
   
   

To download the Slip Sliding Away DataStudio file, click on a Windows (Zip file) or Macintosh (Stuffit file).

You are now ready to begin collecting data.